AI Summary of Peer-Reviewed Research

This page presents an AI-generated summary of a published research paper. The original authors did not write or review this article. [See full disclosure ↓]

Publishing process signals: STRONG — reflects the venue and review process. — venue and review process.

Methanol-to-jet had the lowest costs in CO2-based SAF pathways

A modern industrial facility with tall cylindrical storage tanks, metal piping infrastructure, red structural frameworks, and connected processing equipment against a cloudy sky, representing a large-scale chemical or energy production plant.
Research area:Chemical EngineeringAviation fuelJet fuel

What the study found

Among the CO2-based sustainable aviation fuel pathways assessed, methanol-to-jet had the lowest net production costs and Fischer-Tropsch had the highest. The study also found that hydrogen production was a major cost driver across all scenarios.

Why the authors say this matters

The authors say comparative techno-economic insights across production pathways and regions remain limited, and the study provides a harmonized techno-economic assessment across Europe, the USA, and the Middle East. They also note that aviation accounts for around 2.4% of global CO2 emissions and that demand is expected to grow significantly by 2050.

What the researchers tested

The researchers carried out a harmonized techno-economic assessment of four CO2-based sustainable aviation fuel pathways for e-kerosene production: Fischer-Tropsch synthesis, methanol-to-jet with two variants, and ethanol-to-jet via direct CO2 gas fermentation. They modeled the pathways in Aspen Plus V14 and evaluated them with a custom techno-economic tool across regional scenarios for Europe, the USA, and the Middle East.

What worked and what didn't

Methanol-to-jet with direct CO2 hydrogenation was consistently the most cost-efficient route, with net production costs of about 2.8–5.3 USD per kg of SAF. Fischer-Tropsch performed worst because of extensive tail gas recycling loops and low single-pass CO conversion, while ethanol-to-jet showed intermediate performance but had uncertainties tied to large-scale gas fermentation.

What to keep in mind

The net production costs reported, 2.8 to 8.2 USD per kg of SAF, were above the approximate 1 USD per kg cost of fossil Jet A-1 fuel. The abstract also notes that electrolysis accounted for 55–80% of capital expenditure and that variable operating costs were driven by electricity demand, but it does not provide further limitations beyond these points.

Key points

  • Methanol-to-jet had the lowest net production costs among the assessed CO2-based SAF pathways.
  • Fischer-Tropsch had the highest costs, mainly because of tail gas recycling loops and low single-pass CO conversion.
  • Hydrogen production through electrolysis accounted for 55–80% of capital expenditure in all scenarios.
  • Net production costs ranged from 2.8 to 8.2 USD per kg of SAF, above the approximate 1 USD per kg cost of fossil Jet A-1.
  • Alcohol-based routes showed higher carbon and energy efficiencies than Fischer-Tropsch.

Disclosure

Research title:
Methanol-to-jet had the lowest costs in CO2-based SAF pathways
Authors:
Severin Sendlhofer, Willy Duan, Raphael Allgäuer, Markus Maly, Robert Paulnsteiner, Dominik Wimmer, Christoph Markowitsch
Institutions:
Montanuniversität Leoben
Publication date:
2026-03-11
OpenAlex record:
View
AI provenance: This post was generated by OpenAI. The original authors did not write or review this post.